About the problem that everyone needs to be clear about the application of the suspended permanent magnet separator- RCYD
the email of beltmagnets factory

HomeNews › About the problem that everyone needs to be clear about the application of the suspended permanent magnet separator

About the problem that everyone needs to be clear about the application of the suspended permanent magnet separator

The application of the suspended permanent magnet separator covers a wide range of industries, which can meet the mineral purification requirements of many industries, and has high operating efficiency and good energy saving effect, which can bring great economic benefits to customers. So what kind of hanging permanent magnet iron remover is good?
The hanging permanent magnet separator produced by Henderson Magneto has many advantages. 1. The iron is completely exhausted. In the design of the iron passage, the cleaned sewage can be completely discharged from the machine, and the impurities in the sewage can not be precipitated in the passage, which affects the iron removal effect. 2. High degree of automation. The suspended iron remover can automatically plan the cleaning cycle, complete self-cleaning, automatic separation, and sewage treatment. 3. Simple structure. Easy to install and use, easy to clean, the structure of the suspended permanent magnet separator equipment should be easy to install and disassemble and internal inspection and cleaning. In addition, the surface of the magnetic source or the magnetic absorbing medium of the suspended permanent magnet separator is smooth and clean, and the surface after cleaning does not accumulate mud. It is more energy-saving and environmentally friendly. During the cleaning process of the suspended permanent magnet separator, the cleaning time is short, the cleaning water is less expensive, and the environment is contagious.

The hanging permanent magnet iron remover has high working efficiency and is better than the permanent magnet separator in use. However, it has certain requirements on the working environment, and can meet the requirements to start normally, otherwise it may cause malfunction or damage to the equipment. Let’s take a look at it today.
1. Before the operation, the suspended permanent magnet iron remover should check the electrical insulation performance of the coil and the motor. Always observe whether the readings of the voltmeter and ammeter are normal and must not exceed their rated values. Determine if it is correct and reliable, and then use it without any errors.
2. Before starting the machine, check if the indicated oil level is at the upper limit of the oil mark. And in turn, each switch is powered, and the excitation circuit is started to check the fan airflow outward, and the flow meter indication is correct. Otherwise, the fan and special pump electrical wiring should be adjusted.
3. If the effect of the iron removal of the suspended permanent magnet separator is not good, adjust the lifting height or the distance between the iron remover and the head roller.

Suspended permanent magnet