Analysis of the main points during the installation and operation of suspension permanent magnets- RCYD
the email of beltmagnets factory

HomeBlog › Analysis of the main points during the installation and operation of suspension permanent magnets

Analysis of the main points during the installation and operation of suspension permanent magnets

Installation in appropriate circumstances is a necessary condition for the normal operation of the iron remover. Correct installation and reasonable operation can ensure the efficiency and working effect of the suspension permanent magnet . Today, Henderson Magnet’s technical experts will briefly analyze some of the key points in the installation and operation of the suspension permanent magnet.
If the suspension permanent magnet is turned on for the first time after powering on, you must observe whether the running direction of the equipment is correct. If the moving direction is not correct, you should immediately shut down, change the direction of motor rotation and try again. Before using the equipment, according to the mixing amount of ferromagnetic debris in the powder, adjust the opening and closing time of the motor and adjust the button of the time relay in the electric control box to adjust the two times. The value can be directly observed on the button. Pads or asbestos ropes must be placed between the inlet and outlet flange joints to ensure the sealing performance of the joints to prevent dust from eroding the environment.
Suspended permanent magnets do not allow excessive iron blocks to enter the machine under working conditions, so as to avoid malfunction of the magnet group or affect the iron removal effect, the staff must pay special attention.

Suspension permanent magnet