Belt Magnetic reminds everyone to use the Belt Magnetic to strictly check

On Belt Magnetic, the correct and reasonable operation is the premise to ensure the efficiency of the operation. In addition, the strict inspection of the permanent magnet separator before use is also critical. Checking can kill small faults. In the cradle. For belt type permanent magnet separators, the applicable inspection steps need to be taken before each start-up.

Before the start-up operation of the Belt Magnetic, check whether the clamp of the hanging steel rope is secure and complete (requires not less than 3), check whether the steel rope is broken, whether the fastening bolt is loose or not. The phenomenon of the card belt, if it is found that the problem should be processed before driving. Check the suspension position of the Belt Magnetic and check if the fasteners of the drive unit are adequate. Also check the switch on the Belt Magnetic control cabinet, press the (rotate) button, signal light and instrument, etc., the door is held in private tightly.