Cleaning the Belt Magnetic separator to meet the operational requirements- RCYD
the email of beltmagnets factory

HomeBlog › Cleaning the Belt Magnetic separator to meet the operational requirements

Cleaning the Belt Magnetic separator to meet the operational requirements

The use of Belt Magnetic iron remover is inseparable from maintenance: in the production and life, if you like to take the equipment for a longer period of time, you can’t do without the maintenance of the equipment. The maintenance work for the iron remover is basically performed in a state of shutdown. When the machine is not part of use, it is placed in a dry and ventilated place. It is not compatible with equipment that works continuously for a long time. The continuous working time should be controlled within the working time supported by the equipment. Do not overload the work, otherwise the life of the iron remover will be affected.

So what is the level of cleaning of the Belt Magnetic iron remover?

For the cleaning of Belt Magnetic iron remover, the following requirements should be met:

1. It is necessary in order to automatically judge the cleaning cycle, self-cleaning, and the development trend of sewage treatment of automatic separators. The surface of the magnetic source or magnetically absorbing medium should be smooth and clean, and there will be no sediment accumulation after cleaning.

2. In the process of cleaning, the cleaning time should be short, the cleaning water consumed by the cleaning should be less, and the pollution of the environment should be low.

3. In the design of the iron removal passage of the iron remover, the cleaned sewage can be completely discharged from the machine, and the impurities in the sewage cannot be precipitated in the passage.

4, the equipment should be easy to clean. The equipment structure should be easy to install and disassemble and internal inspection and cleaning.

 

Belt Magnetic