Common installation position of Overband Magnet separator

When using a Overband Magnet iron remover, the installation position is different being dependent on the application. Take a look at several common installation positions of the Overband Magnet separator.

1. The installation position of the Overband Magnet iron remover is at the discharge port of the main pipe, that is, the material hoist, which can remove the ferromagnetic substances existing in the material, reduce the circulation of magnetic substances in the V-type classifier, and improve the circulation. The working efficiency of the V-type classifier protects the roller surface of the lower equipment from being damaged during use, prolonging the service life of the roller pressure and increasing the output of the mill.

2. The Overband Magnet iron remover is mounted on the lower part of the selected grade, that is, the coarse powder return tank. The iron impurities in the coarse powder and the small steel segments and small steel balls flowing through the sieve plate inside the mill can be removed to prevent the iron impurities from re-entering the air flow groove, thereby increasing the speed of the air flow and achieving the coarse grinding back. Since the iron eliminator is prevented from re-grinding after the iron remover is installed, and pulverization time of the coarse powder is shortened, the mill increases the production time by about 12%, which improves the production efficiency.

3. The Overband Magnet is installed at the exit of the cement hoist, that is, the front part of the packaging machine, which can remove the ferromagnetic small particle impurities flowing out of the mill sieve through the mill sieve and the metal substances worn in the machine. It has a role in protecting the steel impeller and the outlet impeller of the packaging machine, ensuring the output of the cement and prolonging the service life of the packaging machine.