Description of maintenance points in the use of the belt magnetic separator control cabinet

The controller is an important core component for the entire belt magnetic separator. It is not only the supplier of the DC power required for the belt magnetic separator, but also the controller of the entire belt magnetic separator. Therefore, in the process of using the belt magnetic separator, the control cabinet must be protected. As long as the control cabinet is maintained, it can guarantee the normal operation of the whole equipment.
What are the maintenance points of the belt magnetic separator control cabinet? First of all, the control cabinet of the belt magnetic separator should be placed in a place that is dust-free, dry, free from rain and snow, has good ventilation, and is easy to operate and observe. Before using the belt magnetic separator control cabinet, carefully check the equipment. Whether the electrical components, connecting wires and fasteners are loose or damaged caused by long-distance transportation, the wiring should correctly distinguish the output end from the input end; the control cabinet of the belt magnetic separator should be dusted once every quarter and check each Whether the electrical contacts are loose or not, if problems occur, they should be repaired in time.
In addition, if the silicon rectifying diode is damaged in the controller of the belt magnetic separator, the diode of the same type should be selected for replacement, but it must be noted that the polarity of the symbol on the diode is the same as the original, otherwise the wiring should be adjusted.