Description of the main points of lifting the Overband Magnet separator- RCYD
the email of beltmagnets factory

HomeBlog › Description of the main points of lifting the Overband Magnet separator

Description of the main points of lifting the Overband Magnet separator

In the process of using the Overband Magnet iron remover, it is necessary to move and install the iron remover. When moving the Overband Magnet separator, it is generally necessary to rely on the lifting equipment to complete. When lifting the cable, the steel cable should be used. The lifting ring on the Overband Magnet iron remover is put together. Before starting lifting, it is necessary to carry out a comprehensive inspection on the hanger and the lifting wire for the lifting ring of the Overband Magnet iron remover, and confirm that the connection of each part is not loose and then allow the lifting operation. .
When installing the Overband Magnet separator, the Overband Magnet separator is connected with the mobile trolley by the hanging device. The height of the assembly is the vertical distance of 450 mm from the bottom of the Overband Magnet separator to the conveyor belt surface. When the middle installation is performed, the body of the iron remover needs to be kept horizontal. If the installation location is selected at the head position, the Overband Magnet iron remover should be inclined at an angle of 15 to 30 degrees with the head wheel of the conveyor. The center of the Overband Magnet separator should be offset from the center line of the conveyor head wheel by 150- 200 mm, the installation position is from the bottom of the Overband Magnet iron remover to the 450 mm vertical height of the front wheel surface of the belt.

Overband Magnet