Description of the relevant problems for the use of Overband Magnet

Overband Magnet is a kind of iron separator equipment that is familiar to everyone. Its use is relatively simple:
1. Turn on the air supply to the feeder. 2. Connect the power supply and switch the switch to the automatic gear position. The Overband Magnet will complete the iron removal work without someone to take care of it. If you want to control it manually, you can cut the switch to the manual gear position. The personnel are free to manipulate the Overband Magnet. The steps to manually operate the Overband Magnet are as follows:
One layer of iron removal → the second layer of iron removal → the third layer of iron removal → the fourth layer of iron removal → circulation above operation, the following matters should be noted when using the dry powder iron remover:
1. Regularly repair and replace the coil of the Overband Magnet, usually replace it once every 2-3 months to avoid damage to the magnetic rod.
2. When replacing the Overband Magnet coil, pay attention to the alignment of the vertical and the holes to avoid damage to the equipment.
3. Non-professional electricians should not open the operating electrical box of the Overband Magnet to avoid the risk of electric shock.
4. Remember to turn off the power switch of the Overband Magnet after finishing the operation.