Do not ignore these problems in the operation of the suspension permanent magnet

Suspension permanent magnet have the advantages of relatively high magnetic field strength and magnetic field gradient, superior iron absorption ability, small weight, low energy consumption, environmental protection and pollution-free. Permanent magnets can be used to generate the super strong magnetic field required to remove ferromagnetic impurities in raw materials such as coal. However, suspension permanent magnets are not easy to worry about after starting operation. You must not take lightly the problems in the operation of the following equipment.

1. For suspension permanent magnets, personnel should never stand in the forward direction after the equipment is started to avoid being injured by the ironware sucked out by the equipment.
2. During operation, you need to pay attention to whether the operation of the equipment is stable, whether there are abnormal noises and its iron removal, and that the unloading tape cannot deviate or crack. Generally, the iron remover does not stop during the operation of the coal conveyor belt.
3. During the operation, pay close attention to the temperature of the exciter and the operation of the fan. When the temperature exceeds 100 degrees Celsius, the machine must be shut down and checked.
4. Operation method of unloading permanent magnets: press the forward or backward button on the power distribution cabinet, after the iron remover moves to a predetermined position, press the excitation stop button, wait until all iron on the plate is removed Move to the original position and turn on Ranci.
5. After stopping the transportation of the coal belt, remove all the iron that it sucked up before stopping the permanent magnet. Suspension permanent magnets should be carefully checked for oil shortages during parking and should be maintained and maintained in a timely manner.