Do you know how these common problems with belt magnetic separators are caused?- RCYD
the email of beltmagnets factory

HomeBlog › Do you know how these common problems with belt magnetic separators are caused?

Do you know how these common problems with belt magnetic separators are caused?

One of the main functions of the belt magnetic separator is that it can complete the automatic unloading of iron. However, this type of iron remover will inevitably have some faults and problems. Therefore, it is clear why the common fault of the belt magnetic separator is caused. Is it? Come and share with you today:
1. After the power is turned on, the belt remover is not operated and there is no excitation. The reason for this may be that the segment switch is not closed; the thermal relay action is not restored; the fuse of the control circuit is broken.
2. After the power is turned on, the belt magnetic separator device can be turned on, but the switch will be automatically controlled after the excitation. The reason is that the silicon rectifier is broken down, the indication of the voltmeter is abnormal, and the DC side is broken, and the current indication is abnormal.
3. After the power is turned on, the belt magnetic separator is turned on, but it cannot be excited. The main reason is that the temperature control relay has no action; the cooling fan is faulty; the excitation winding temperature is too high.
4, the belt magnetic separator is often excitation and strong excitation switching is not normal. The main reason is that there is a metal detector that does not work; the metal detector malfunctions; the time relay is not well set; the time relay is faulty.
5, belt magnetic separator iron motor gearbox temperature rise is too high, the sound is abnormal. The reasons are: the belt remover motor overload or bearing damage, the worm gear in the gearbox is seriously worn, and the reducer is short of oil.

Belt Magnetic