Don’t forget to do some maintenance with the suspended permanent magnet separator- RCYD
the email of beltmagnets factory

HomeBlog › Don’t forget to do some maintenance with the suspended permanent magnet separator

Don’t forget to do some maintenance with the suspended permanent magnet separator

The suspended permanent magnet separator is a common auxiliary device in the iron removal equipment. It generates magnetic fields by using high-strength magnetic permanent magnet blocks without power consumption. It is primarily used in the production lines of large and medium-sized production enterprises for the removal of ferromagnetic impurities in materials such as blocks, powders and slurries. The hanging permanent magnet iron remover should be frequently maintained and maintained during use. The following is a brief introduction to the maintenance elements of the suspended permanent magnet separator.

1. The sprocket chain of the new equipment is prone to loosening and it is necessary to test it frequently.

2, usually pay attention to whether the machine is abnormal during the operation, pay attention to the war level of other equipment parts, pay attention to the replacement of parts at any time. If the gear is abnormal during operation, stop it immediately and check the cause and eliminate it.

3. The bearing of the suspended permanent magnet separator is a very important component. The degree of lubrication has a terrific relationship with the service life of the bearing. It directly affects the working efficiency of the machine, so the injected lubricant is very clean and the effect is good, and the bearing should also be sealed.

Suspended permanent magnet