Don’t forget to do these checks after installing the Overband Magnet
The Overband Magnet can achieve the intended operation effect. The installation is the key. For the installation work of the iron remover, it is usually performed by the technician with relevant experience. Because there is a mistake in the installation process, it may cause the Overband Magnet to fail to operate normally, which will have a serious impact on the separation of the iron. In addition, the suspension of the Overband Magnet does not mean that everything is going well, and the relevant inspection work must not be negligent.
The installation of the Overband Magnet requires a focus on the following four aspects:
1. It is necessary to check whether the electrical components in the control box of the Overband Magnet are intact and the terminals are in good contact.
2. Confirm whether the voltage value of the Overband Magnet is normal or not, whether it can be well insulated, and whether the fuselage and control cabinet are grounded.
3. Confirm that the installation height of the Overband Magnet is accurate, the hanging device is not enough enough, and the lock is not locked.
4. Check that the walking trolley with the Overband Magnet is able to operate normally and the direction is not correct.
- Iron removal equipment manufacturers take you to have a deep understanding of the suspension magnetic separatorMay 07, 2020
- How to repair the belt of the Overband Magnet iron removerApril 29, 2020
- What aspects of the suspension magnetic separator have been improved to meet the market demandApril 27, 2020
- What are the applications of different types of suspension permanent magnetsApril 25, 2020
- What is the significance of suspension permanent magnet for raw material productionApril 23, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China