Don’t neglect the acceptance work before installing the suspension permanent separator

The suspension magnetic separator is designed by computer simulation and has a perfect dual magnetic pole structure, which ensures a large adsorption capacity for iron impurities within the working distance. The neodymium iron boron used in the core has high purity, large amount and strong magnetic force, and can easily absorb iron debris. Many users can’t wait to install and put them into production after purchasing a suspended magnetic separator. In fact, before installing a suspended magnetic separator, the acceptance work must be done first. Lifting equipment should be used when moving the suspended permanent magnet iron remover. When lifting the equipment, the steel cable should be sleeved on the ring of the iron remover. Before lifting the equipment, you need to check the hanger, the lifting rigging and the Whether the lifting ring of the iron remover is loose before lifting. The acceptance criteria for suspended permanent magnet iron separators are as follows:

1. First, check the reliability of the connection at both ends of the suspension device of the suspension magnetic separator;
2. Confirm whether the track limit device of the walking car is safe and reliable, and also observe whether the running of the car is stable;
3. After the trolley travels to and from the iron suction station, the center of the suspended magnetic separator should be aligned with the center of the belt and the center of the iron trolley after the limit of the abandoned iron;
4. If two devices are installed on a belt, use the program control to check whether the alternating operation is accurate, stable and reliable. Each unit must be run at least 10 round trips without load, without any problems before it can be put into trial production operation;
5. After putting into production trial operation, pay special attention to observe and check the operation status of the main unit of the suspended magnetic separator, the accuracy of the stop position after the capacity of iron absorption and iron abandonment is limited, and whether the alternating operation procedure is confusing.
6. Pay attention to observe the operation status and suction and discharge capacity of the suspended magnetic separator. You can manually put the iron with different weight and shape into the material to detect the suction and discarding capacity of the host. To be adjusted.