How many steps do you take to clean the Overband Magnet separator- RCYD
the email of beltmagnets factory

HomeBlog › How many steps do you take to clean the Overband Magnet separator

How many steps do you take to clean the Overband Magnet separator

With the rapid development of current technology, major machinery industries have also achieved certain progress. The emergence of Overband Magnet separators is of huge significance to the slurry industry, and has also received extensive attention and recognition. Overband Magnet separators The material is stainless steel full sealing equipment. After being used for a period of time, it should be cleaned and maintained regularly. Otherwise, it will affect the iron removal effect. The following is the procedure for cleaning the Overband Magnet separator.

When cleaning the Overband Magnet iron remover, first loosen the magnetic core fixing screw, take out the magnetic core, clean the iron impurities adsorbed on the surface of the magnetic rod, and then install the magnetic core to the cylinder body, fix it, and install the magnetic core. Make sure the gasket is completely caught in the gasket slot to avoid material leakage during operation due to gasket misalignment. When cleaning the iron impurities on the surface of the magnet, you can use thick cotton gloves, rags, trays and other tools. If necessary, you can wash them with water.

The Overband Magnet iron remover should be cleaned regularly depending on the content of iron impurities in the treated material and the material handling amount per hour. Generally, the thickness of the powdery iron impurities adsorbed on the surface of the magnetic rod should not exceed 10mm, and the dust should be cleaned regularly in time to maintain the most good use effect, improve the quality of iron removal.

The above is the cleaning procedure and precautions for the Overband Magnet separator. I hope that it would help everyone.

Overband Magnet