How to avoid making mistakes in the selection of suspension magnetic separator- RCYD
the email of beltmagnets factory

HomeNews › How to avoid making mistakes in the selection of suspension magnetic separator

How to avoid making mistakes in the selection of suspension magnetic separator

Suspension magnetic separator can remove magnetic materials from various materials, so it has a very wide range of uses. However, many users can’t achieve the ideal working efficiency when they first use the iron separator. The situation is likely to be that the selection has not been done well. Here is how to avoid making mistakes when purchasing a suspension magnetic separator:

1. The suspension magnetic separator does not have a stronger magnetic field when selecting iron, and the effect of removing iron is better.
2. Don’t choose equipment blindly without knowing the materials correctly:
(1) the granularity of the material;
(2), the particle size and content of ferromagnetic impurities;
(3) Ferromagnetic materials and composition contained in the materials, the ratio of ferromagnetic materials and weak magnetic services;
3.Selection principle of suspension magnetic separator:

(1) When selecting a suspension magnetic separator, the user should apply the thickness of the material according to the form of the material, the content of ferromagnetic impurities, the requirement of the removal rate, and the thickness of the material.

(2) If there is not much iron in the material, manual iron unloading should be selected, RCDA, RCDB series suspension magnetic separator or RCYB suspension magnetic separator.
(3) If there is a large iron content in the material, RCDC, RCDD series suspension magnetic separator or RCYD series suspension magnetic separator should be selected.
(4) If there is too much ferromagnetic material in the material, the particle size is too large, and the material layer is thick. If the user has higher requirements for the removal rate, a high field strength suspension magnetic separator can be used, and if necessary Multi-stage iron removal program.
(5) If the site environment is relatively bad (such as large amount of dust, high humidity and high temperature), a suspension magnetic separator with a fully enclosed structure can be selected.

Suspended permanent magnet