How to get started quickly with Overband Magnet iron remover

The Overband Magnet iron remover is significantly higher in work efficiency than the ordinary iron remover device, and the strong magnetic field formed after the power is the source of the suction force of the device. Although the operation of the Overband Magnet iron remover is not very complicated, as a novice, you still need to master some techniques of using the equipment. Today, I will introduce some operation techniques to help you get started quickly.
1. Before use, check the lifting rings and screw buckles of the Overband Magnet iron remover. Make sure that they are in perfect condition, and there should be no cracks or hook-and-loop opening.
2. Check the electronic control equipment of the Overband Magnet iron remover to confirm whether it is complete, complete and reliable.
3. The belt conveyor must be powered by the Overband Magnet separator before starting, and it is interlocked with the matching belt conveyor.
If the Overband Magnet iron remover is in working condition, the operator on the post should always pay attention to whether the electronic control indication is normal or not. The performance of the iron removal is not good. After the problem is found, the belt conveyor and the iron remover should be stopped for processing. When the Overband Magnet iron remover on the belt conveyor sucks more iron, it should be cleaned in time or cleaned up every day. The belt conveyor does not allow the automatic electromagnetic separator to be powered off during operation, allowing the iron to enter the next process.