How to reflect anti-corrosion in the process of making Overband Magnet iron remover- RCYD
the email of beltmagnets factory

HomeNews › How to reflect anti-corrosion in the process of making Overband Magnet iron remover

How to reflect anti-corrosion in the process of making Overband Magnet iron remover

Overband Magnet iron remover is mostly used in open air environment, often exposed to the sun and rain, many of the chassis are soaked into the water, and the corrosion of the equipment for a long time is a serious problem. Regarding the anti-corrosion treatment of the Overband Magnet iron remover, it can be seen from the manufacturing process of the Overband Magnet iron remover, and the manufacturing process adopted mainly includes the following points:
1. Select the applicable material to weld and forge the bottom case;
2. Install the iron core on the bottom shell according to different types of suction cups;
3. Winding the coil according to the required number of turns and the parameters, and drying it on the iron core;
4. Pour asphalt and other waterproof materials into the bottom case;
5. Process the panel and assemble it with the bottom shell part;
The fixed plate refers to a device that does not move or fix the magnetic steel in the electromagnetic iron remover, and is processed by several materials such as nylon, stainless steel and aluminum. The moving plate refers to a device that forms a magnetic force or a magnetic force in the same direction or opposite magnetic pole as the magnetic steel in the fixed plate, and the material used is the same as the fixed plate.

Overband Magnet