How to start the Suspended permanent magnet separator- RCYD
the email of beltmagnets factory

HomeNews › How to start the Suspended permanent magnet separator

How to start the Suspended permanent magnet separator

It is very important to understand the operation points of the start-up operation when the Suspended permanent magnet iron remover is used. Here is how to start the Suspended permanent magnet separator:

1. Turn on the total power of the site on the premise of ensuring safety and correctness;

2. Open the outside of the control cabinet, the inner door, and close the power switch in the electric control cabinet. At this time, the indicator light on the power supply is on, and then the motor switch of the inner door of the electric control cabinet and the PLC control power switch and the PLC output signal power switch are closed. Close the inner door;

3. Press the roller start button, the roller running indicator light is on, at this time, the iron remover starts to unload the iron;

4. Press the excitation start button, the excitation running indicator light is on, and the excitation voltage meter and ammeter indicate to the rated value at this time;

5. If the rated value is not reached, turn the excitation adjustment knob on the panel clockwise to adjust the excitation current of the iron remover to the rated value, so that the iron remover works under the rated parameters. At this time, the excitation voltage meter and the ammeter indicate their rated values respectively;

 

Suspended permanent magnet