It is important that the suspension magnetic separator is in place- RCYD
the email of beltmagnets factory

HomeBlog › It is important that the suspension magnetic separator is in place

It is important that the suspension magnetic separator is in place

The current market demand for suspension magnetic separator is very large, especially the requirements for material processing are constantly increasing, which has led to the continuous increase in user requirements for equipment for processing materials. As a kind of high-performance iron removal equipment, it is very important to install the separator in place when installing a suspension magnetic separator.
The suspension magnetic separator must be grounded when it is installed, and because the installation place of the suspension magnetic separator will directly affect the use efficiency of the suspension magnetic separator, it is necessary to pay attention when installing the suspension magnetic separator. The angle between the two rings should not exceed ninety degrees during installation, and the subsequent installation should be carried out only after the rings are securely installed.
Suspension magnetic separator manufacturers tell us that in order to ensure the good operation of the suspension magnetic separator, non-magnetic materials should be used for the roller support under the suspension magnetic separator to avoid the suspension magnetic separator caused by the support. Use is affected, and rain damage should be avoided during the use of suspension magnetic separators.

suspended permanent magnet