Main points of starting operation of Overband Magnet separator- RCYD
the email of beltmagnets factory

HomeNews › Main points of starting operation of Overband Magnet separator

Main points of starting operation of Overband Magnet separator

The normal operation of the Overband Magnet separator is inseparable from the correct starting operation. The following points are introduced to the starting point of the Overband Magnet separator:

1. Turn on the total power of the site on the premise of ensuring safety and correctness;

2. Open the outside of the control cabinet and the inner door, and close the power switch in the electric control cabinet. At this time, the power indicator light is on, and then the motor switch and PLC control power switch and PLC output signal power switch of the inner door of the electric control cabinet are closed. Close the inner door;

3. Press the start button of the drum, the running indicator of the drum is on. At this time, the iron remover starts to run off the iron;

4. Press the excitation start button and the excitation running indicator light. At this time, the excitation voltage meter and ammeter indicate to the rated value;

5. If the rated value is not reached, turn the excitation adjustment knob on the panel clockwise to adjust the excitation current of the Overband Magnet  separator to the rated value, so that the separator can work under the rated parameters. At this time, the excitation voltmeter and ammeter respectively indicate its rating.

 

Overband Magnet