Maintenance of suspended permanent magnet separators negligence
The effect of the suspended permanent magnet separator is very much related to the normal maintenance. The maintenance of the equipment is very detailed and regular work. It must be coordinated with the operation and maintenance, and it is the responsibility of the full-time staff. The specific operational details mainly include the following points:
1. The whole load of the machine is borne by the bearing, so the lubrication of the bearing is very much related to the normal use of the equipment. It is directly linked to the service life and operation rate of the iron remover. Therefore, the lubricating oil required for maintenance must be required. Clean and have a good seal.
2. If the wheel is newly installed, it is prone to looseness, so it is necessary to check frequently.
3. It is not normal to pay close attention to the various parts of the machine.
4. Pay more attention to the wear level of the wear parts. If the wear is serious, replace the worn parts in time.
5. The plane of the undercarriage placed on the mobile device should be cleaned of dust and other materials to prevent the movable bearing from moving on the chassis due to the inability of the equipment to work, resulting in a safety accident.
6. If the oil temperature of the bearing is found to rise, stop immediately to check and eliminate the fault.
7. If you hear the sound of the rotating gear in the process of running, stop immediately to check and eliminate the fault.
- This is the right operation for the purchase of suspension magnetic separatorApril 02, 2020
- How to avoid making mistakes in the selection of suspension magnetic separatorMarch 31, 2020
- Which aspects of suspension permanent magnets are better than similar equipmentMarch 26, 2020
- Why can the suspension magnetic separator usher in development opportunitiesMarch 25, 2020
- Is there a better way to improve the effect of the suspension magnetic separator than multiple iron removals?March 21, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China