Maintenance of the gold strategy of the belt magnetic separator

Belt magnetic separator manufacturer: Whenever you do anything, you must abide by the rules and regulations, and you can’t do anything about it. This is not only the norm of the mining industry, but also the normal operation of the whole society. Rules can guarantee normal order and strategies can improve work efficiency. The same is true during the use of the iron remover. Today, the technical experts of Henderson Magnetism will introduce some of the use and maintenance strategies of the belt magnetic separator, and hope to help everyone.
Before the belt magnetic separator is turned on, the operator must open the observation port cover to check whether there are any large-sized iron pieces on the inner separator of the belt magnetic separator (especially the tap hole). If you have one, you must remove it before you can turn it on. Every shift operator should remove the dust on the gear motor; add the calcium grease to the gearing hole of the geared motor and the chain on the side of the machine once every six months; replace the oil in the oil tank at the bottom of the chassis every 12 months, if the temperature of the material is found If it exceeds 100 degrees Celsius, it is necessary to shorten the oil change time.