Overband Magnet iron remover has no good way to prevent blockage- RCYD
the email of beltmagnets factory

HomeNews › Overband Magnet iron remover has no good way to prevent blockage

Overband Magnet iron remover has no good way to prevent blockage

The Overband Magnet iron remover has a magnetic system composed of a high-quality ferrite material and a rare earth magnet steel composite. The iron remover can achieve an average magnetic induction intensity of 100-600 mT; the structure is not complicated, and the processing capacity is high, Very easy to carry on. A key issue in the use of dry iron removers is how to prevent blockages.

In order to prevent clogging, the Overband Magnet iron remover device will install a magnetic pole of a weak magnetic field in the core cylinder, and discharge the ferromagnetic mineral in the feed material in advance. Specifically, it works in such a way that the ore is discharged to the ore belt through the ore cylinder, and is evenly discharged to the ore belt through the belt, and the weak magnetic mineral is in the magnetic field. Under the action, it will be sucked onto the tines of the disc and brought to the sides of the belt under the rotation of the disc. This position is sharply decreased due to the strength of the magnetic field, so under the action of gravity and centrifugal force, it falls to the belt two. The inside of the tank in which the magnetic material is placed (usually a concentrate); the non-magnetic material is transported by the belt to the tailings end and discharged into the tank where the non-magnetic material is placed (usually tailings), so that the equipment is After the improvement, the problem of clogging can be avoided, and it is more favorable for the iron removal process of the concentrator.

Overband Magnet