Overband Magnet manufacturer’s standard instructions for the maintenance of Overband Magnet- RCYD
the email of beltmagnets factory

HomeNews › Overband Magnet manufacturer’s standard instructions for the maintenance of Overband Magnet

Overband Magnet manufacturer’s standard instructions for the maintenance of Overband Magnet

Overband Magnet belongs to a kind of mechanical equipment with high working strength. When the iron separator works for a long time, there will help to ensure failures and problems. To maintain the effective running state of the Overband Magnet, it is necessary to make the equipment malfunction. Maintenance, what kind of standards do you need in order to reach for the maintenance of the Overband Magnet?

1. The bolts and nuts of the connection parts of the Overband Magnet are to be fastened and cannot be loosened.

2. The rollers and rollers of the Overband Magnet should be in a position to rotate flexibly.

3. The axis of the main drum and the reversing drum of the Overband Magnet shall be in the same plane, and the distance between the middle cross section of the drum and the center plane of the machine body shall be within 1mm.

4. The tension roller bearing of the Overband Magnet should be flexible enough, and the iron strip should not be deflected.

5. The Overband Magnet single-stage worm gear reducer has no load and 25% load running test time of more than 2 hours. During the running-in process, it requires smooth rotation, no impact and vibration, no abnormal sound, and no sealing parts. The problem of oil leakage, the oil temperature during work can not exceed 65-70 degrees Celsius.

6. After 30 minutes of trial operation, the fan of Overband Magnet shall have a radial runout of 0.06mm. When the fan is fully loaded, the air volume shall be above 4800 m3/h, and the wind pressure shall not be lower than 265 Pa.

7. The driving power and temperature rise of the whole machine canbe not greater than the specified value.

8. Excitation switching of the Overband Magnet should be accurate and the action should be flexible.

9. The direction of the discarding iron tape should be correct.

 

Overband Magnet