Points to be followed when overhauling the suspension magnetic separator
It is inevitable that the parts of the suspension magnetic separator equipment will be aging and malfunction in the long-term use process. Therefore, as a user of the iron remover, you should master the correct inspection method and ensure that it is handled in a timely manner. So which points should be followed for the maintenance of the suspension magnetic separator?
1. Before repairing the suspension magnetic separator, power off first and stop the pulley. If the equipment is still in operation, it will bring certain danger to the operators, so it must be powered off and stopped first. This is a crucial step.
2. There is also a need to clean up the impurities before the suspension magnetic separator is repaired, so that the exact location of the problem can be detected and the maintenance is more targeted. This is a very critical step for inspection.
3. If the suspension magnetic separator is higher from the ground. It is usually recommended to remove the magnetic suspension separator and place it on the ground for maintenance. If you are compelled to work at high altitudes, you should fasten your seat belts and safety ropes, and wear a hard hat.
4. Before the suspension magnetic separator is repaired, it is necessary to carefully understand the working principle and basic structure, so that it can be clear where the problem lies and how to repair it. This requires a look at the factory drawings and manuals for safe use.
5. Strictly prepare all repair tools in accordance with the instructions on the manual, and gradually troubleshoot. Sometimes the suspension magnetic separator fails, which may be caused by two or three or more reasons. Therefore, we should solve them one by one during the investigation.
6. If you encounter a major problem, be sure to contact the manufacturer of the suspension magnetic separator, and arrange for a professional technician to help repair or telephone to guide you how to do it.
- Iron removal equipment manufacturers take you to have a deep understanding of the suspension magnetic separatorMay 07, 2020
- How to repair the belt of the Overband Magnet iron removerApril 29, 2020
- What aspects of the suspension magnetic separator have been improved to meet the market demandApril 27, 2020
- What are the applications of different types of suspension permanent magnetsApril 25, 2020
- What is the significance of suspension permanent magnet for raw material productionApril 23, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China