Requirements for the design of Belt Magnetic iron remover- RCYD
the email of beltmagnets factory

HomeNews › Requirements for the design of Belt Magnetic iron remover

Requirements for the design of Belt Magnetic iron remover

Belt Magnetic iron remover has become an important tool for various large steel enterprises, including metal mines, power plants, light industry, refractory materials and other important materials industries. This kind of iron remover is also inseparable. To ensure the high performance of the Belt Magnetic iron remover, the following aspects must be met when designing it.
1. The production of Belt Magnetic iron remover should adopt a good magnetic conductive material sealing technology to avoid its shortening of service life due to oxidation;
2. There are several types of Belt Magnetic iron remover models with different flow rates and the same power to meet the economic needs of multi-stage series operation;
3. The automatic cleaning level of the Belt Magnetic iron remover should be high, and at the same time reduce the loss of slurry and water, especially the glaze removal of iron;
4. In the spray drying tower, the Belt Magnetic iron remover is required to have a sufficiently large effective flow rate, which can comply with the slurry treatment capacity of 20 tons/hour or more;
5, the structure should be simple, easy to maintain and repair, the volume should be as small as possible, the application is stable and reliable;
6. In the material transmission route, high-quality stainless steel should be used to avoid secondary rust and other impurity pollution.

Belt Magnetic