Several inspections that can not be ignored before the Suspended permanent magnet starts

Suspended permanent magnet is a kind of mechanical equipment that can generate strong magnetic field attraction. It can remove the ferromagnetic impurities mixed in the material to ensure the safety of the grinding machine, crusher and other mechanical equipment in the conveying system. For normal work, it is essential that the Suspended permanent magnet has several inspections before starting:

1. Check whether the clamps of the suspended steel rope are complete and firm before driving, and can not be lower than three. If there is no broken rope in the steel rope, whether the fastening bolt of the iron remover is loose or not, whether there is a scratched belt or not, If you find a problem, you must treat it in time to drive.

2. Check the hanging position of the iron remover to check if it is suitable and whether the height is suitable.

3. Check if there is any substantial iron adsorption on the magnet, and the debris that has influence on the operation of the lower equipment must be removed.

4. Check whether the fasteners of the drive unit are resolved and complete, whether the oil level of the reducer is suitable, the transmission chain should be tight and proper lubrication.

5. Check the switch on the control panel of the Suspended permanent magnet, press the knob, signal, meter, etc. to confirm whether it is normal. The door should be held in private tightly.