Several points need to be attached to the installation of the suspension magnetic separator safety support- RCYD
the email of beltmagnets factory

HomeNews › Several points need to be attached to the installation of the suspension magnetic separator safety support

Several points need to be attached to the installation of the suspension magnetic separator safety support

Whether the installation of the suspension magnetic separator is in place is an important aspect related to the later use effect. In order to solve the problem that the iron separator is not hung firmly, certain measures need to be taken. The magnetic separator is equipped with a safety bracket. So what do you need to pay attention to when installing a bracket for a suspension magnetic separator?

1. Before installing the bracket, the place where the I-shaped steel column is placed under the suspension magnetic separator should be cleaned and the nearby debris should be cleaned.
2. When carrying I-steel by hand, pay attention to the cooperation of personnel. It should be directed by a special person. When passing through the damper, the damper cannot be opened at the same time. When the miner’s steel exceeds 50 kg, it must be transported by two people.
3. When the suspension magnetic separator bracket is installed, it should be pulled through the inverted chain to avoid falling, and the inverted chain can only be removed after the bracket is fixed and stable.
4. After the oxygen and acetylene bottles are used up, they shall be installed in separate wells and not allowed to be stored under the well.
The above contents are for reference only. The safety bracket brings a better safety guarantee to the use of the suspension magnetic separator, but the installation process of the bracket must also pay attention to safety, otherwise it will be worth the loss.

 

Suspended permanent magnet