Suspended permanent magnet separator should be operated according to the steps when unloading iron- RCYD
the email of beltmagnets factory

HomeNews › Suspended permanent magnet separator should be operated according to the steps when unloading iron

Suspended permanent magnet separator should be operated according to the steps when unloading iron

Suspended permanent magnet separators are generally suitable for the removal of iron from materials with a small amount of magnetic substances. The use of such iron separators can reduce the cost of investment and does not require too much work environment. In addition, there are many places to pay attention to when the suspended permanent magnet iron remover performs the iron unloading operation. Mastering these skills can improve the efficiency of the work.
Suspended permanent magnet separator should follow the steps below when removing iron.
First, notify the dispatching room in advance, and then clean the material on the belt conveyor after it has been transported and parked.
Second, after the belt conveyor is parked, the heading switch on the head conveyor box of the belt conveyor should be adjusted to the parking position, and the stop sign should be hung.
Thirdly, the power supply of the Suspended permanent magnet separator is cut off through the control cabinet, and the “many work, no closing” sign is hung on the operation button.
Fourth, after all the iron pieces falling on the manual permanent magnet separator are removed, the manual permanent magnet separator is restored to the power supply, the prompt plate on the operating box of the head is removed, and the master switch is switched to the centralized control position. I want to report to the dispatching room to resume production.
The above steps are the basic unloading sequence of the Suspended permanent magnet separator. In the production, the principle of ensuring safety should be adopted, and the operation should be flexible.

Suspended permanent magnet