Suspension magnetic separator must be replaced in time if felt loop wear occurs- RCYD
the email of beltmagnets factory

HomeBlog › Suspension magnetic separator must be replaced in time if felt loop wear occurs

Suspension magnetic separator must be replaced in time if felt loop wear occurs

The felt belt inside the sprocket cover inside the suspension magnetic separator and the large sprocket have felt ring designs to ensure the seal and effective breathing of the iron remover chassis, and it will not be damaged during maintenance. After wearing, the felt ring must be replaced in time.
If the particle size of the powder is small, the ferromagnetic content is high. The amount of powder entrained in the discharge from the outlet will increase, which is normal. If the amount of discharged material is too large and the user wants to recycle the material, you can choose to purchase a suspension magnetic separator with supporting products. Before starting the machine, the operator should open the observation hole cover and check whether there are any large iron parts (especially the discharge hole) in the suspension magnetic separator. If so, you must clear it before opening it. Every shift must remove the dust on the permanent magnet geared motor; the oil reduction hole of the geared motor and the side chain of the machine must be added with calcium-based grease every six months; if the material temperature is high, the oil in the oil tank at the bottom of the chassis must Replace every 12 months. At 100 degrees Celsius, shorten the oil change time. Once the suspension magnetic separator has a mechanical failure and the production line is temporarily inconvenient to stop, the power of the machine can be turned off, the operator can remove the iron through the observation port, and the production line can continue to work. At the same time, however, maintenance personnel should be arranged in a timely manner. Without authorization, non-professionals must not open the cover without permission to avoid damage to the machine. Be sure to apply oil sealant before each lid.

Suspended permanent magnet