Suspension magnetic separators are regularly checked to prevent problems
Suspension magnetic separator is an important part of the coal transportation system. The important task of iron removal must be completed by it. The raw coal mined in coal mines is generally mixed with metal impurities of various shapes and sizes, such as ore nails. , Screws and the like. The entry of these debris into the coal transportation system will pose a safety threat to the belt conveyor or conveyor belt, and may also cause serious harm to other production equipment, or even cause serious safety accidents. Therefore, we need to install a suspension magnetic separator to absorb metal debris to ensure the normal operation of the coal transportation system.
With the extension of the operation time of the suspension magnetic separator, various problems will inevitably occur in the equipment. Regular inspections are conducted to find out hidden safety hazards. Replace damaged parts in time to ensure the normal operation of the coal transportation system. Therefore, it is necessary to do a good job of checking the suspension magnetic separator before starting it, in order to effectively avoid the occurrence of various problems in the application of the suspension magnetic separator. The specific contents to be checked are as follows:
1. It is necessary to check whether the suspension orientation of the suspension magnetic separator is suitable and whether the height is appropriate;
2. Check to see if there is any large iron on the magnet of the suspension magnetic separator. If there is any debris that affects the operation of the equipment below, it must be removed;
3. Check whether the fasteners of the suspension magnetic separator drive equipment are reliable, whether the oil level of the reducer is appropriate, whether the tightness of the transmission chain is suitable, and whether the lubrication effect is good;
4. Before starting the machine, check whether the hanging steel rope clips are intact and firm. The number must be more than three, whether the steel rope is broken, and whether the fastening bolts of the suspension magnetic separator are loose or not. If the phenomenon of scratching the belt occurs, the problem must be dealt with before the driver can be restarted;
5. Check whether the switches, knobs, signal lights, appearance, etc. on the control cabinet are normal. Is the cabinet door tight?
- Iron removal equipment manufacturers take you to have a deep understanding of the suspension magnetic separatorMay 07, 2020
- How to repair the belt of the Overband Magnet iron removerApril 29, 2020
- What aspects of the suspension magnetic separator have been improved to meet the market demandApril 27, 2020
- What are the applications of different types of suspension permanent magnetsApril 25, 2020
- What is the significance of suspension permanent magnet for raw material productionApril 23, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China