The choice of Suspended permanent magnet separator must be based on actual working conditions- RCYD
the email of beltmagnets factory

HomeBlog › The choice of Suspended permanent magnet separator must be based on actual working conditions

The choice of Suspended permanent magnet separator must be based on actual working conditions

When using the Suspended permanent magnet iron remover, it is necessary to consider the iron content of the material, the size of the iron block, the requirements of the iron tap, the use environment, the characteristics of the iron remover and the size of the work site can be used with the belt conveyor, etc. .

When the amount of iron in the material is large, it is recommended that you use a Suspended permanent magnet separator with continuous discharge and automatic unloading. The automatic unloading function is adopted, which can effectively protect the conveyor belt from damage caused by tearing due to excessive iron pieces. When the iron in the material is small and the size of the iron is not particularly substantial, it is recommended that you use a mechanically-mounted Suspended permanent magnet separator. In this case, the height of the lower suspension can be appropriately lowered. However, it is necessary in order to specify here that if manual unloading is used, it is necessary to always pay attention to the amount of iron. If it is too bulky, it will cause blockage or scratch on the belt conveyor. If the environment used is harsh, such as coal dust, dust, and soot, it is best to use a fully enclosed suspension type electromagnetic iron remover. The strength and size of the magnetic field of the Suspended permanent magnet separator and the model number are also tailored depending on the size of the work site and the work requirements, and cannot be generalized.

Suspended permanent magnet