The height of the belt of the Suspended permanent magnet
Suspension height of the Suspended permanent magnet is initially determined as the adjustment of height H. If the installation is used obliquely. In addition to the height H, the inclination α is also checked.
1. Horizontal installation of the iron removal equipment is required. For example, the working surface of the lower iron removal belt of the machine should be stored as parallel as possible with the conveyor belt.
2. For the inclined installation of the Suspended permanent magnet, it is necessary to make the unloading machine of the large belt align the higher point of the material to the middle position of the magnetic system as much as possible, so as to better improve the use effect of the equipment.
3. The power-on test run of the Suspended permanent magnet is stable and reliable, and the belt is not deflected. The no-load test runs time should be no less than 2 hours. After observing that everything is working properly, it can be made available for production.
- How should the Overband Magnet iron remover meet safety technical requirements during installationApril 09, 2020
- What are the outstanding aspects of the design of the light suspension magnetic separatorApril 08, 2020
- Development of industrial technology points new direction for suspension magnetic separatorApril 03, 2020
- This is the right operation for the purchase of suspension magnetic separatorApril 02, 2020
- How to avoid making mistakes in the selection of suspension magnetic separatorMarch 31, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China