The key to the use of suspended permanent magnet separator is how to use it- RCYD
the email of beltmagnets factory

HomeBlog › The key to the use of suspended permanent magnet separator is how to use it

The key to the use of suspended permanent magnet separator is how to use it

The newly purchased suspended permanent magnet iron remover wants to play its value more, and the key is to use it properly. The iron remover manufacturer will send someone to help the customer to install the equipment. After the installation, the rest of the operation will be completed by the staff. Here are some key points in the use of the suspended permanent magnet separator.
Before starting work, pay attention to whether the operation of each part of the suspended permanent magnet separator is normal. Newly installed tires tend to loosen when the machine is running, so check it often. Also pay attention to the temperature rise of the bearing at any time. If the temperature rise is too large, it should be stopped immediately. If the rotating gear can hear a large impact sound during the operation, stop the vehicle immediately and check the fault. In addition, you should always check the status of the parts that are prone to wear on the suspended permanent magnet separator, and repair and replace the worn parts at any time. Place the undercarriage plane of the movable device, and pay attention to remove dust and other debris to prevent the movable bearing from moving on the chassis when the machine encounters untreated materials, thus causing serious safety accidents.

Suspended permanent magnet