The subtlety of the structural design of the Overband Magnet separator- RCYD
the email of beltmagnets factory

HomeNews › The subtlety of the structural design of the Overband Magnet separator

The subtlety of the structural design of the Overband Magnet separator

Overband Magnet iron remover is a type of iron remover that is widely used. This type of iron remover includes a frame, a motor, a driving roller, a driven roller, a supporting roller, a belt with a scraper, and a permanent magnet. Wait a few parts.
During the operation of the Overband Magnet iron remover, the motor drives the main, driven rollers and idler rollers to drive the belt around the permanent magnet system. The permanent magnet is placed in a stainless steel box and fixed on the frame by a yoke. The yoke must have sufficient thickness, and its thickness should ensure that the yoke has the ability to pass the entire magnetic system magnetic flux, and its thickness is generally 20-150mm. The permanent magnet system is mainly composed of magnetic blocks made of neodymium-iron-boron. Its special magnetic circuit composed of yoke iron can make the magnetic system penetrate deeper under the same suspension height and field strength, and the effective adsorption area of ​​the magnetic field It is relatively large and is concentrated under the iron remover, which can effectively reduce the occurrence of magnetic leakage and prevent iron parts from being attracted to the side of the iron remover.
Both the driving roller and the driven roller of the Overband Magnet separator are close to both sides of the permanent magnet system, and the diameter of the driving roller and the driven roller are both 200-325mm, so that the structure of the entire iron separator is more compact and reasonable. In order to adapt to more occasions to install and use.

Overband Magnet