There are actually many choices about the choice of Overband Magnet

Although the Overband Magnet has strong applicability in various industries, it does not mean that just buying one can meet the production requirements. Selecting a reasonable iron remover model can ensure high-quality iron removal operations. There are actually a lot of choices about the choice of Overband Magnet, here are some of them:

1. The Overband Magnet should be correctly selected according to the miscellaneous replacement net removal rate requirements, the iron content of the materials, and the working environment on site.
2. If the bandwidth of the belt conveyor does not exceed 1400 mm, it is recommended to use a Overband Magnet. If the bandwidth of the belt conveyor exceeds 1600 mm, it is recommended to use an electromagnetic hanging type magnetic separator.
3. When the Overband Magnet is installed, due to the inertial force of the material, it is in a loose state when it leaves the belt, which is convenient for iron removal. If the drive of the belt head is made of non-magnetic material, the iron removal effect will be more ideal. .
4. The hanging device of the Overband Magnet needs to be determined according to the specific needs of the working environment on site, and it should be selected after measuring the size and environmental conditions of the Overband Magnet.
5. When installing the Overband Magnet, the lower roller can be changed to a non-magnetic flat roller, which can further improve the iron removing effect.
6. When using multi-stage iron removal, the iron removal suction of the subsequent stage should exceed the iron removal suction of the previous stage. Otherwise, the iron removal effect will be reduced.
7. When the on-site operating environment is special and the situation is complicated, everyone chooses a special customized matching model to meet the requirements of actual working conditions.