There are several key points that must be clarified when purchasing the unloading belt used in the suspension magnetic separator

The unloading belt is a key component installed on various types of suspension magnetic separator has a strong magnetic force and is adsorbed onto the unloading belt. The unloading iron belt scrapes the adsorbed iron impurities to the non-magnetic area and is discharged into the iron collecting box to achieve continuous Automatic iron removal work effect. No need for manual cleaning, automatic elimination of iron is achieved.
For various reasons, the iron-removing belt is prone to wear and tear during the operation. Once the belt is damaged and cannot meet the operation requirements, the iron-loading body must be replaced in time. Then, when purchasing the suspension magnetic separator, the iron belt should be clear. What are the points?
1. Provide the manufacturer with the exact bandwidth, perimeter and thickness of the required unloading belt.
2. It is necessary to determine whether the required unloading belt is a one-time formed ring belt or a joint type, and secondly, it is necessary to confirm whether the iron discharging blade is a rubber strip integrated scraper or a stainless steel scraper.
In addition, in general, the manufacturer of the suspension magnetic separator is generally used for the production of equipment, which is usually a one-time forming belt. However, when the user replaces it later, the replacement and installation of the one-time forming belt is not It is very convenient, the suspension magnetic separator needs to be dismantled and unloaded, and after the iron unloading belt is set, it is reassembled and replaced. It is very troublesome to replace. The joint-type unloading iron belt solves this problem well, eliminating the need to disassemble the suspension magnetic separator. It only needs to be connected after the belt is installed at the joint, saving time and effort. More durable.