Use a suspended permanent magnet iron remover to ensure strict inspection
For the suspended permanent magnet separator, the correct and reasonable operation is the premise to ensure the efficiency of the operation. In addition, the strict inspection of the permanent magnet separator before use is also essential. Checking can kill small faults. In the cradle. For suspended permanent magnet separators, the relevant inspection steps need to be taken before each start-up.
Before the start-up operation of the suspended permanent magnet iron remover, check whether the clamp of the hanging steel rope is secure and complete (requires not less than 3), check whether the steel rope is broken, whether the fastening bolt is loose or not. The phenomenon of the card belt, if it is found that the problem should be processed before driving. Check the suspension position of the suspended permanent magnet separator and check if the fasteners of the drive unit are suitable. Also check the switch on the suspended permanent magnet separator control cabinet, press the (rotate) button, signal light and instrument, etc., the door is closed tightly.
- Iron removal equipment manufacturers take you to have a deep understanding of the suspension magnetic separatorMay 07, 2020
- How to repair the belt of the Overband Magnet iron removerApril 29, 2020
- What aspects of the suspension magnetic separator have been improved to meet the market demandApril 27, 2020
- What are the applications of different types of suspension permanent magnetsApril 25, 2020
- What is the significance of suspension permanent magnet for raw material productionApril 23, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China