What are the details of maintaining a Overband Magnet separator- RCYD
the email of beltmagnets factory

HomeBlog › What are the details of maintaining a Overband Magnet separator

What are the details of maintaining a Overband Magnet separator

In many users’ view, as long as the correct operation of the Overband Magnet separator is mastered, the value of the machine can be fully utilized. In fact, the correct operation is only the first step, and the performance of the Overband Magnet separator itself must be maximized. It is also important to put the maintenance work in place. Here are some specific operational details for the maintenance of Overband Magnet separators:
First, check the flap before starting the machine. Check whether there is a large iron piece left in the iron buckle inside the Overband Magnet remover. It must be ensured that it can be turned on before use. If the equipment suddenly fails during the work process and the production line has no way to stop temporarily, then the power of the Overband Magnet separator should be turned off, and then the stuck iron block is removed. Secondly, for each work shift, the dust on the geared motor should be cleaned. And every six months, it is necessary to replenish the geared motor. There is also an inner felt strip of the machine side sprocket cover and a large sprocket lower felt ring designed to enable the chassis to be effectively sealed and breathed, and cannot be damaged during the inspection operation; if the felt ring appears after long-term use Serious wear and tear should be replaced in time.

Overband Magnet