Home› Blog › What are the maintenance points of the Overband Magnet remover in the harsh temperature environment
What are the maintenance points of the Overband Magnet remover in the harsh temperature environment
The temperature environment will have different effects on various equipment. In addition to the daily procedures for the maintenance of the belt iron remover, some other procedures need to be added to allow the Overband Magnet remover to survive the harsh temperature environment. test.
The use of the Overband Magnet remover is very important for the equipment to be well maintained and maintained. Under the severe temperature environment, the regular operation of the iron remover can ensure the normal operation of the Overband Magnet remover. The main points for maintenance of the belt type iron remover are explained below.
1. Regularly check the power line to avoid damage to the iron remover motor due to short circuit, check whether the fan of the motor is worn, add lubricating grease to the reducer, and check all the drive roller bearings. If heat is found, replace it in time, pay attention to the belt Wear and tear.
2. During the working process, the bearing oil temperature may increase due to continuous equipment operation or other reasons. Then the job should be terminated immediately to find the immediate cause and perform maintenance.
3. The importance of the bearing for the Overband Magnet remover is self-evident. Special attention must be paid to the maintenance of the bearing. Regular lubrication can extend the service life of the bearing.
4. The maintenance of the electromagnetic Overband Magnet remover is especially important. It must be protected from rain and moisture, and check whether there is moisture in the interior. Once found, contact the manufacturer for maintenance.
5. When moving and using the Overband Magnet remover, the working surface should be protected from severe impact and vibration. The Overband Magnet remover installed outdoors should be equipped with rainproof facilities. Check the line from the iron remover to the control cabinet.
- Development of industrial technology points new direction for suspension magnetic separatorApril 03, 2020
- This is the right operation for the purchase of suspension magnetic separatorApril 02, 2020
- How to avoid making mistakes in the selection of suspension magnetic separatorMarch 31, 2020
- Which aspects of suspension permanent magnets are better than similar equipmentMarch 26, 2020
- Why can the suspension magnetic separator usher in development opportunitiesMarch 25, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China