Home› Blog › What are the points that must be achieved when the suspended permanent magnet separator is operated efficiently
What are the points that must be achieved when the suspended permanent magnet separator is operated efficiently
To ensure the high quality and efficient operation of the suspended permanent magnet separator, there is a lot of work to be undertaken. The following is a detailed description.
1. The appropriate iron remover should be selected according to the impurity removal rate requirement, the iron content of the material, and the on-site working environment.
2. When the site environment is special and the situation is complicated, special design should be made to meet the actual working conditions.
3. When the suspension type permanent magnet iron remover is installed in the middle of the belt conveyor, the idler roller under the iron remover can be changed into a non-magnetic flat roller, so that the effect of the loss can be further improved.
4. When using multi-stage iron removal, the iron removal force of the later stage should be higher than that of the former stage, otherwise the effect of low iron removal will be removed.
5. When the suspended permanent magnet iron remover is installed on the head of the belt conveyor, the material has inertial force and is loose when leaving the belt, which is good for removing iron. If the driver of the belt head is changed to non-magnetic material, iron removal the effect will be better.
6. When the belt conveyor has a bandwidth of less than 1400mm, it is best to use a belt type permanent magnet iron remover. The belt conveyor has a bandwidth of 1600mm or more and is advised to use an electromagnetic separator.
7. The hanging device of the suspended permanent magnet separator should be chosen according to the actual needs of the on-site working environment, and then purchased according to the position and environmental conditions of the iron separator.
- Development of industrial technology points new direction for suspension magnetic separatorApril 03, 2020
- This is the right operation for the purchase of suspension magnetic separatorApril 02, 2020
- How to avoid making mistakes in the selection of suspension magnetic separatorMarch 31, 2020
- Which aspects of suspension permanent magnets are better than similar equipmentMarch 26, 2020
- Why can the suspension magnetic separator usher in development opportunitiesMarch 25, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China