What are the production standards for all aspects of suspension magnetic separators

In order to ensure the good performance of the suspension magnetic separator, it is necessary to strictly implement the relevant standards in the production process to ensure that all aspects of quality meet the standards.
First, the suspension magnetic separator steel structure must have sufficient rigidity and strength, its appearance must be smooth and beautiful, and all welds must be polished smoothly. Suspended magnetic separator suspension facilities such as suspension booms, rings, ears, etc. must be secure and firm, and meet the requirements for long-term use.

The steel required for the manufacture of the suspension magnetic separator must be shot blasted or sandblasted. The surface of the dump iron remover must be coated with two layers of primer and two layers of paint, and a certain amount of on-site paint and topcoat color Determined by the purchaser.
The surface cleaning and painting of the suspension magnetic separator are carried out in strict accordance with the relevant standards.
The noise of the suspension magnetic separator 1m away from the equipment should not exceed 85dB.
The protection class of the suspension magnetic separator motor is IP54.
The main body of the suspension magnetic separator should be welded and sealed to prevent the internal coil from being attacked by external water vapor. The coil of the suspension magnetic separator should be made of high insulation material, and it should have good insulation protection and heat resistance. The magnetic core material of the suspension magnetic separator should be made of electric pure iron.