What are the requirements for the use of the control cabinet for the Belt Magnetic separator- RCYD
the email of beltmagnets factory

HomeNews › What are the requirements for the use of the control cabinet for the Belt Magnetic separator

What are the requirements for the use of the control cabinet for the Belt Magnetic separator

What are the conditions for the use of Belt Magnetic separators in the control cabinet? Here is a detailed explanation for everyone, I hope that it is very helpful for everyone to operate the Belt Magnetic separator.

1. In the Belt Magnetic separator, the control cabinet should be used at an altitude not exceeding 2000 meters.

2. The medium temperature of the surrounding environment should not be higher than 40 °C, and should not be lower than -5 °C.

3. When the ambient temperature of the control cabinet in the Belt Magnetic separator is 40 °C, the relative humidity does not exceed 50%, and the relative humidity can be raised appropriately when the temperature is low. When the average minimum temperature is +25 ° C, the relative humidity should not exceed 90%, taking into account possible surface condensation.

4. The installation inclination is no more than 5 degrees, and there is no noticeable shaking and shock oscillation.

5. The control cabinet in the Belt Magnetic iron remover should be used in the place where there is no rain or snow, in the medium without explosion danger, and there is no gas and dust in the medium which is enough to corrode metal and destroy the insulation.

Belt magnetic