What aspects do you need to check before starting the suspension magnetic separator

In order to ensure the stable operation of the suspension magnetic separator, it is very important to check the pre-starting operation. Before starting the suspension magnetic separator, it is necessary to check whether the indicated oil level is at the upper limit of the marked oil level. Conversely, each switch is energized, the excitation circuit is activated to check the fan’s airflow outward, and the flowmeter display should be correct. Otherwise, the wires of the fan and the dedicated pump should be properly adjusted.

Pay close attention to the readings of the susceptor of the suspension magnetic separator and the ammeter to see if it is normal. Make sure that it cannot exceed its rated value. If the effect of removing iron is not satisfactory, adjust the lifting height or the suspension magnetic separator with the bucket roller. Distance between them; check the electrical insulation properties of the coil and motor. After ensuring that the requirements are met, commission the power supply.
Before the suspension magnetic separator is operated, the insulation resistance of the winding to the magnet housing should be less than 10 megohms. Check that the wiring of the field winding is correct and reliable.
The lower the suspension magnetic separator, the better the effect of removing iron, the higher the efficiency, and the higher the dilution rate of the material. The higher the magnetic field strength of the suspension magnetic separator, the better the effect of removing iron. If you are inclined to install, you should find the angle and properly suspend the suspension magnetic separator. The lower the height of the suspension, the better it will not affect the normal operation of the belt. Proper installation and suspension will have a major impact on the performance of the suspended magnetic separator. In the actual application process, the correct use and maintenance should be done to achieve a good iron removal effect.