Home› Blog › What aspects of Overband Magnet iron remover need to be done before it can be officially operated
What aspects of Overband Magnet iron remover need to be done before it can be officially operated
No matter how good the equipment is, it will inevitably have various problems in long-term use. In order to avoid the failure of Overband Magnet separator in operation and affect the normal production, you need to do the corresponding For inspection work, the following aspects should be done for the inspection of Overband Magnet separator:
Before turning on the Overband Magnet separator, check whether the indicated oil level is at the upper limit. Apply power to each switch in turn, and check the excitation circuit to confirm whether the airflow from the fan is outward and the flowmeter is accurate. If there is a problem, adjust the fan and dedicated pump piping.
Always pay attention to the readings of the voltmeter and ammeter to ensure that the values are normal and must not exceed the rated value. If the iron removal effect is not ideal, adjust the lifting height or the distance between the Overband Magnet iron remover and the bucket wheel; check the electrical insulation performance of the coil and the motor. As long as the requirements are met, the power supply can be commissioned.
The lower the suspension of the permanent magnet iron remover in Shandong, the better the effect of iron removal and the higher the dilution rate of the material. The higher the magnetic field strength of Overband Magnet iron remover, the better the effect of iron removal. If it is to be installed, it is necessary to find the correct angle and hang the Overband Magnet separator in the correct way. The lower the hanging height, the better, without affecting the normal operation of the belt. The correct installation and suspension will have a great impact on the performance of Overband Magnet separator. In actual use, it should be used and maintained properly to achieve a good iron removal effect.
- How should the Overband Magnet iron remover meet safety technical requirements during installationApril 09, 2020
- What are the outstanding aspects of the design of the light suspension magnetic separatorApril 08, 2020
- Development of industrial technology points new direction for suspension magnetic separatorApril 03, 2020
- This is the right operation for the purchase of suspension magnetic separatorApril 02, 2020
- How to avoid making mistakes in the selection of suspension magnetic separatorMarch 31, 2020
Contact: Bright Han
Factory Add：No. 2798 Yongjun Road, Weicheng District, Weifang City, Shandong Province, China