What method is used to adjust the suspended permanent magnet suspension

Many users are curious about how to adjust the suspension of the suspended permanent magnet iron remover. What method is used specifically? Before understanding the adjustment method of the electromagnetic iron separator suspension deviation, first adjust the roller bracket to make the belt bias to one side, and then adjust the roller bracket according to the graphic direction. Make repeated adjustments until the belt is adjusted to a better position. Before adjusting the drive or reversing the drum, you need to find the correct and accurate position.
1. First adjust the roller bracket of the suspended permanent magnet separator to the appropriate position. Then, adjust any one of the driven roller chocks to the proper position. If the driven roller bearing has been adjusted to this amount, adjust the other driven roller bearing until the belt is disconnected.
2. The adjustment of the deviation of the belt conveyor in the two-way operation, the adjustment of the deviation of the belt of the two-way belt conveyor is more difficult than the adjustment of the deviation of the one-way belt conveyor. In the specific adjustment, you should first adjust one direction and then adjust the other direction.
When adjusting, carefully observe the relationship between the direction of the movement of the suspended permanent magnet separator and the deviation trend, and adjust them one by one. The focus is on the adjustment of the drive roller and the redirection roller, and then adjust the blanking point of the idler and material. It should also be noted that if the joint is vulcanized, the belt should be uniformly stressed in the longitudinal direction of the belt, and when the guide chain is used, the forces on both sides should be as equal as possible.