What should be done by the operator of the suspended permanent magnet separator- RCYD
the email of beltmagnets factory

HomeNews › What should be done by the operator of the suspended permanent magnet separator

What should be done by the operator of the suspended permanent magnet separator

Suspended permanent magnet separators with excellent performance in actual production will inevitably have various failures. If the inexperienced iron separator operator may be in a hurry, busy errors will lead to more serious accidents. Therefore, as an excellent operator of suspended permanent magnet iron remover, you can’t panic after encountering problems. If you master a few skills, you can make a constant change and make your work handy.
1. The suspended permanent magnet iron remover should have a certain method in use. Before starting the machine, the operator needs to open the observation port cover to check whether the inner separator of the suspended permanent magnet separator (especially the position of the tap hole) There are large iron pieces that cannot be discharged. If it is, it should be cleared before it can be turned on. The inner side sprocket cover inner felt strip and the large sprocket lower felt ring are designed to ensure the sealing and effective ventilation of the chassis, and can not be damaged during maintenance; if the felt ring is worn for a long time, it should be replaced in time. .
2. When the suspended permanent magnet iron remover fails, it needs to maintain a calm attitude, shut down the production line in time, repair or report to the person in charge. Skilled in mastering the use of suspended permanent magnet iron remover, will achieve twice the result with half the effort.

Suspended permanent magnet